Description: The QMAP project completed the last of 21 new 1:250 000 geological maps in 2012. The maps cover all of New Zealand and their accompanying texts describe each area’s geomorphology, stratigraphy, tectonic history, geological resources, geological hazards and engineering geology in general terms.This dataset is a subset of into a seamless national geological databasethat is accessible to the New Zealand public in vector and raster formats, and will be maintained and updated as a Nationally Significant Database.
Copyright Text: Institute of Geological and Nuclear Sciences Ltd
Description: This dataset has been created from the a georeferenced plans and Engineering knowledge of the drains that the Regional Council manages and maintains through out the region. Note equipment used by the regional council needs at most 7.5m strip alongside the drain. Buffering of 10m has been added so as to alleviate any errors in drawing of the drains, therefore consider the two outer lines as advisory only. Attribute fields: Feature Name: Type (Canals, Rivers, Waterway ie Creeks; and Drains. No definitions on the differences were given on original map) Grid: Grid number given on map Given Length: Length of Drain given on map 2 Name: Name of Drain Asset Number: ECan asset number ID: ECan ID number
SOURCECODE
(
type: esriFieldTypeString, alias: SOURCECODE, length: 6
, Coded Values:
[NZMSGR: Derived from a NZMS 260 Grid Reference.]
, [NZTMGR: Derived from a NZTM Grid Reference]
, [GPS: Direct input from a GPS device]
, ...3 more...
)
QARCODE
(
type: esriFieldTypeSmallInteger, alias: QARCODE
, Coded Values:
[1: Differential GPS (advanced) or Geodetic Land Survey.]
, [2: Standard handheld GPS OR accurate location sketch, confirmed by GIS.]
, [3: Site visit OR dillers GPS OR checked location sketch using GIS.]
, ...4 more...
)
Description: A draft boundary line shows areas of vegetation retained under the Soil Conservation and Rivers Control Act (1941).A desired boundaryline showsareas where it would be beneficial to increase the vegetated buffer width to the land side so that a consistent protective buffer can be achieved. In some cases, on the river side, the actual buffer width will depend on whether or not the vegetated buffer can be made to fill the area to the desired fairway edge in a reasonable time or not. On the landward side, any areas for new planting will need to be agreed with the landowner (and in general terms at least by the rating district).
Description: See RMA definition of riverbed and NRRP guidance 6.2 2 2. Generally, a river bed line shows the outside toe of the stopbank where there are stopbanks (provided the stopbank is of a sufficient standard), a terrace, or, where there are no well-defined terraces or stopbanks, a pragmatic boundary such as a ridge, the edge of a channel or a road. Where a "draft river bed" line is shown, a"alternativeriver bed line"is less preferred. Where there are multiple "alternative" lines shown, there is less certainty about which line is most reasonable. Where there is only one "alternative" line and no "draft"line, this is an area where there is little evidence and least confidence in the line.
SOURCECODE
(
type: esriFieldTypeString, alias: SOURCECODE, length: 6
, Coded Values:
[NZMSGR: Derived from a NZMS 260 Grid Reference.]
, [NZTMGR: Derived from a NZTM Grid Reference]
, [GPS: Direct input from a GPS device]
, ...3 more...
)
QARCODE
(
type: esriFieldTypeSmallInteger, alias: QARCODE
, Coded Values:
[1: Differential GPS (advanced) or Geodetic Land Survey.]
, [2: Standard handheld GPS OR accurate location sketch, confirmed by GIS.]
, [3: Site visit OR dillers GPS OR checked location sketch using GIS.]
, ...4 more...
)
SOURCECODE
(
type: esriFieldTypeString, alias: SOURCECODE, length: 6
, Coded Values:
[NZMSGR: Derived from a NZMS 260 Grid Reference.]
, [NZTMGR: Derived from a NZTM Grid Reference]
, [GPS: Direct input from a GPS device]
, ...3 more...
)
QARCODE
(
type: esriFieldTypeSmallInteger, alias: QARCODE
, Coded Values:
[1: Differential GPS (advanced) or Geodetic Land Survey.]
, [2: Standard handheld GPS OR accurate location sketch, confirmed by GIS.]
, [3: Site visit OR dillers GPS OR checked location sketch using GIS.]
, ...4 more...
)
SOURCECODE
(
type: esriFieldTypeString, alias: SOURCECODE, length: 6
, Coded Values:
[NZMSGR: Derived from a NZMS 260 Grid Reference.]
, [NZTMGR: Derived from a NZTM Grid Reference]
, [GPS: Direct input from a GPS device]
, ...3 more...
)
QARCODE
(
type: esriFieldTypeSmallInteger, alias: QARCODE
, Coded Values:
[1: Differential GPS (advanced) or Geodetic Land Survey.]
, [2: Standard handheld GPS OR accurate location sketch, confirmed by GIS.]
, [3: Site visit OR dillers GPS OR checked location sketch using GIS.]
, ...4 more...
)
SOURCECODE
(
type: esriFieldTypeString, alias: SOURCECODE, length: 6
, Coded Values:
[NZMSGR: Derived from a NZMS 260 Grid Reference.]
, [NZTMGR: Derived from a NZTM Grid Reference]
, [GPS: Direct input from a GPS device]
, ...3 more...
)
QARCODE
(
type: esriFieldTypeSmallInteger, alias: QARCODE
, Coded Values:
[1: Differential GPS (advanced) or Geodetic Land Survey.]
, [2: Standard handheld GPS OR accurate location sketch, confirmed by GIS.]
, [3: Site visit OR dillers GPS OR checked location sketch using GIS.]
, ...4 more...
)
SOURCECODE
(
type: esriFieldTypeString, alias: SOURCECODE, length: 6
, Coded Values:
[NZMSGR: Derived from a NZMS 260 Grid Reference.]
, [NZTMGR: Derived from a NZTM Grid Reference]
, [GPS: Direct input from a GPS device]
, ...3 more...
)
QARCODE
(
type: esriFieldTypeSmallInteger, alias: QARCODE
, Coded Values:
[1: Differential GPS (advanced) or Geodetic Land Survey.]
, [2: Standard handheld GPS OR accurate location sketch, confirmed by GIS.]
, [3: Site visit OR dillers GPS OR checked location sketch using GIS.]
, ...4 more...
)
Description: Locations where river flow or stage measurements have been recorded. These locations are derived from Environment Canterbury's Gaugings Database. Each record summarises the date of the first and most recent survey, the number of surveys recorded for the site, whether the site is monitored for a specific reason (such as for compliance or low flow monitoring purposes) and lists the minimum and maximum surveyed flows recorded.
SOURCECODE
(
type: esriFieldTypeString, alias: SOURCECODE, length: 6
, Coded Values:
[NZMSGR: Derived from a NZMS 260 Grid Reference.]
, [NZTMGR: Derived from a NZTM Grid Reference]
, [GPS: Direct input from a GPS device]
, ...3 more...
)
QARCODE
(
type: esriFieldTypeSmallInteger, alias: QARCODE
, Coded Values:
[1: Differential GPS (advanced) or Geodetic Land Survey.]
, [2: Standard handheld GPS OR accurate location sketch, confirmed by GIS.]
, [3: Site visit OR dillers GPS OR checked location sketch using GIS.]
, ...4 more...
)
SOURCECODE
(
type: esriFieldTypeString, alias: SOURCECODE, length: 6
, Coded Values:
[NZMSGR: Derived from a NZMS 260 Grid Reference.]
, [NZTMGR: Derived from a NZTM Grid Reference]
, [GPS: Direct input from a GPS device]
, ...3 more...
)
QARCODE
(
type: esriFieldTypeSmallInteger, alias: QARCODE
, Coded Values:
[1: Differential GPS (advanced) or Geodetic Land Survey.]
, [2: Standard handheld GPS OR accurate location sketch, confirmed by GIS.]
, [3: Site visit OR dillers GPS OR checked location sketch using GIS.]
, ...4 more...
)
Description: Records showing a summary of a consented activity related to the discharge or contaminants to land as recorded within Environment Canterbury's Resource Management Act Database. This layer contains discharge to land features that are represented as points for actvities such as the discharge of effluent or stormwater to land, etc.
Note: Prior to 2013 all actvivties were recorded as point features. Subsequent to this activities may have been captured as line or area features. This layer should be used in conjuction with the Discharge to Land Consented Activities Areas and Discharge to Land Consented Activities Global layers to get a full representation of all consented activity features. Depending on the nature and conditions of the consent, more than location point may be associated with a single consent. The feature type property indicates the nature of the recorded activity. The layer includes details on: The type of permit (land use consent, discharge permit, etc.), the section of the RMA underwhich the activity was permitted, the current status of the permit (active, expired, replaced, etc.), the name of the applicant, a description of the location where the activity related to the permit is undertaken, and if the permit was successfully issued, the period over which the permiitted activities apply. Activity specific details related to contaminant type, volumes and application rates are also included if relavent to the type of discharge. The layer also contains several sumary fields related to spatially defined regions the location lies with including: which territorial local authority(s); the Land and Water Regional Plan groundwater & surface water allocation zones and nutrient management zone; the Canterbury Water Management Strategy (CWMS) zone; the Ngai Tahu Runanga area of interest for Resource Consenting purposes; and the clean air zone.
Description: Records showing a summary of a consented activity related to the discharge or contaminants to land as recorded within Environment Canterbury's Resource Management Act Database. This layer contains discharge to land features that are represented as ares less than 10,000ha in size for actvities such as the discharge of effluent or stormwater to land, etc.
Note: Prior to 2013 all actvivties were recorded as point features. Subsequent to this activities may have been captured as line or area features. This layer should be used in conjuction with the Discharge to Land Consented Activities and Discharge to Land Consented Activities Global layers to get a full representation of all consented activity features. Depending on the nature and conditions of the consent, more than location point may be associated with a single consent. The feature type property indicates the nature of the recorded activity. The layer includes details on: The type of permit (land use consent, discharge permit, etc.), the section of the RMA underwhich the activity was permitted, the current status of the permit (active, expired, replaced, etc.), the name of the applicant, a description of the location where the activity related to the permit is undertaken, and if the permit was successfully issued, the period over which the permiitted activities apply. Activity specific details related to contaminant type, volumes and application rates are also included if relavent to the type of discharge. The layer also contains several sumary fields related to spatially defined regions the location lies with including: which territorial local authority(s); the Land and Water Regional Plan groundwater & surface water allocation zones and nutrient management zone; the Canterbury Water Management Strategy (CWMS) zone; the Ngai Tahu Runanga area of interest for Resource Consenting purposes; and the clean air zone.
Name: Discharge to Land Consented Activities Global
Display Field: ConsentNo
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: Records showing a summary of a consented activity related to the discharge or contaminants to land as recorded within Environment Canterbury's Resource Management Act Database. This layer contains discharge to land features that are represented as ares less greater than 10,000ha in size or for activities than can be undertaken region wide in Canterbury such as the discharge of effluent or stormwater to land, etc.
Note: Prior to 2013 all actvivties were recorded as point features. Subsequent to this activities may have been captured as line or area features. This layer should be used in conjuction with the Discharge to Land Consented Activities and Discharge to Land Consented Activities Area layers to get a full representation of all consented activity features. Depending on the nature and conditions of the consent, more than location point may be associated with a single consent. The feature type property indicates the nature of the recorded activity. The layer includes details on: The type of permit (land use consent, discharge permit, etc.), the section of the RMA underwhich the activity was permitted, the current status of the permit (active, expired, replaced, etc.), the name of the applicant, a description of the location where the activity related to the permit is undertaken, and if the permit was successfully issued, the period over which the permiitted activities apply. Activity specific details related to contaminant type, volumes and application rates are also included if relavent to the type of discharge. The layer also contains several sumary fields related to spatially defined regions the location lies with including: which territorial local authority(s); the Land and Water Regional Plan groundwater & surface water allocation zones and nutrient management zone; the Canterbury Water Management Strategy (CWMS) zone; the Ngai Tahu Runanga area of interest for Resource Consenting purposes; and the clean air zone.
Description: Gives the average height of ground water above sea level. This layer was created from a combination of shallow and deep aquifer ground water levels derived from averages of all available data in 2003 (approximately 20 years).
SOURCECODE
(
type: esriFieldTypeString, alias: SOURCECODE, length: 6
, Coded Values:
[NZMSGR: Derived from a NZMS 260 Grid Reference.]
, [NZTMGR: Derived from a NZTM Grid Reference]
, [GPS: Direct input from a GPS device]
, ...3 more...
)
QARCODE
(
type: esriFieldTypeSmallInteger, alias: QARCODE
, Coded Values:
[1: Differential GPS (advanced) or Geodetic Land Survey.]
, [2: Standard handheld GPS OR accurate location sketch, confirmed by GIS.]
, [3: Site visit OR dillers GPS OR checked location sketch using GIS.]
, ...4 more...
)
Description: Gives the average height of ground water above sea level. This layer was created from a combination of shallow and deep aquifer ground water levels derived from averages of all available data in 2003 (approximately 20 years).
SOURCECODE
(
type: esriFieldTypeString, alias: SOURCECODE, length: 6
, Coded Values:
[NZMSGR: Derived from a NZMS 260 Grid Reference.]
, [NZTMGR: Derived from a NZTM Grid Reference]
, [GPS: Direct input from a GPS device]
, ...3 more...
)
QARCODE
(
type: esriFieldTypeSmallInteger, alias: QARCODE
, Coded Values:
[1: Differential GPS (advanced) or Geodetic Land Survey.]
, [2: Standard handheld GPS OR accurate location sketch, confirmed by GIS.]
, [3: Site visit OR dillers GPS OR checked location sketch using GIS.]
, ...4 more...
)
Description: Location of springs information as recorded in Environment Canterbury's Wells database.
Location accuracy is given by the QAR_CODE field:
1 = 1-2 metres
2 = 2-15 metres
3 = 10-50 metres
4 = 50-300 metres
Description: Wells and Bores as recorded in the Environment Canterbury Wells Database. Note that this may include proposed bores and test bores that have been subsequently filled in.
Copyright Text: Environment Canterbury Regional Council
Description: Records showing a summary of a consented activity related to the installation of a well as recorded within Environment Canterbury's Resource Management Act Database.
Description: Records showing a summary of a consented activity related to extracting groundwater for domestic or commercial as recorded within Environment Canterbury's Resource Management Act Database. This layer contains water take features that are represented as points.
Depending on the nature and conditions of the consent, more than location point may be associated with a single consent. The feature type property indicates the nature of the recorded activity. The layer includes details on: The type of permit (land use consent, discharge permit, etc.), the section of the RMA underwhich the activity was permitted, the current status of the permit (active, expired, replaced, etc.), the name of the applicant, a description of the location where the activity related to the permit is undertaken, and if the permit was successfully issued, the period over which the permiitted activities apply. Activity specific details related to maximum allowable application rates and volumes, and allocation regimes are also included if relavent to the type of take. The layer also contains several sumary fields related to spatially defined regions the location lies with including: which territorial local authority(s); the Land and Water Regional Plan groundwater & surface water allocation zones and nutrient management zone; the Canterbury Water Management Strategy (CWMS) zone; the Ngai Tahu Runanga area of interest for Resource Consenting purposes; and the clean air zone.
Description: Intended UseThe Groundwater Allocation Zones layer collates zones for regulating groundwater use as defined in the Canterbury Land and Water Regional Plan (LWRP) and various regional plans. This includes groundwater allocation zones, groundwater management zones, and combined surface water and groundwater zones. Layers were digitised to cadastral accuracy (1:10,000 scale), but recommended use is at the 1:50,000 scale or smaller.For further information on plans and associated planning boundaries, please visit https://www.ecan.govt.nz/your-region/plans-strategies-and-bylaws/ and https://eplan.ecan.govt.nz/eplan/#/Property/0Attribute InformationSpatial IDs: ObjectID, GeoPK, GeoCat, GeoIDZone Names: Zone Name, LabelPlan Name:LWRP - Canterbury Land and Water Regional PlanHWRRP - Hurunui and Waiau River Regional PlanPCEFWARP - Pareora Catchment Environmental Flow and Water Allocation Regional PlanWCEFWARP - Waipara Catchment Environmental Flow and Water Allocation Regional PlanWCWARP - Waitaki Catchment Water Allocation Regional PlanZone Status: Operative - operative plan holding legal bearingProposed-Notified - publicly notified proposed planProposed-Decision - hearing decision version of the proposed planZone Type:Groundwater Allocation Zone - plan applies groundwater allocation limitsGroundwater Management Zone - plan applies allocation and quality limits to Christchurch Groundwater Protection ZoneCombined Allocation Zone - plan applies allocation limits to both surface water and groundwaterNo Groundwater Allocation Zone - aggregate of areas not yet assigned groundwater allocation zonesGIS Metadata Fields: Sourcecode, QARCode, CreatedBy, CreatedDate, ModifiedBy, ModifiedDateGIS Shape Fields: Perimeter_M, Area_M2, Area_HA, Shape, Shape.STArea(), Shape.STLength()
Description: Features identified as part of a desktop study related to recorded wetlands within the Canterbury Region. Information collated from various sources, including aerial imagery and the New Zealand NZMS250 series topo maps.
Note: Information in this layer has not been field verified. The location of a feature in this layer does not necessarily indicate the actual presence of a wetland at that location.
SOURCECODE
(
type: esriFieldTypeString, alias: SOURCECODE, length: 6
, Coded Values:
[NZMSGR: Derived from a NZMS 260 Grid Reference.]
, [NZTMGR: Derived from a NZTM Grid Reference]
, [GPS: Direct input from a GPS device]
, ...3 more...
)
QARCODE
(
type: esriFieldTypeSmallInteger, alias: QARCODE
, Coded Values:
[1: Differential GPS (advanced) or Geodetic Land Survey.]
, [2: Standard handheld GPS OR accurate location sketch, confirmed by GIS.]
, [3: Site visit OR dillers GPS OR checked location sketch using GIS.]
, ...4 more...
)
Description: WERI (Wetlands of Ecological and Representative Importance), is a computer database which contains records on approximately 3,000 wetlands throughout New Zealand. Originated by the Department of Conservation. The Department holds inventories on wetlands: WERI database (Wetlands of Ecological and Regional Importance), Coastal Resource Inventory (including wetlands such as mangroves) and SSWI (Sites of Special Wildlife Interest). These inventories, particular WERI, form an important basis for the Department's advocacy of appropriate management of wetlands by private landowners. Conservation Management Strategies and Regional Policy Statements have provided Department of Conservation and Regional Councils with the chance to identify and state management goals for wetlands on a regional basis. Information includes size; location; land ownership; classification (hydro class, geomorphic origin, community class, dominant plant species); modifiers and threats; buffer, wildlife and vegetation values; other ecological values; cultural values; significance; and sources of information.
SOURCECODE
(
type: esriFieldTypeString, alias: SOURCECODE, length: 6
, Coded Values:
[NZMSGR: Derived from a NZMS 260 Grid Reference.]
, [NZTMGR: Derived from a NZTM Grid Reference]
, [GPS: Direct input from a GPS device]
, ...3 more...
)
QARCODE
(
type: esriFieldTypeSmallInteger, alias: QARCODE
, Coded Values:
[1: Differential GPS (advanced) or Geodetic Land Survey.]
, [2: Standard handheld GPS OR accurate location sketch, confirmed by GIS.]
, [3: Site visit OR dillers GPS OR checked location sketch using GIS.]
, ...4 more...
)
Color: [0, 38, 115, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 9 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
SOURCECODE
(
type: esriFieldTypeString, alias: SOURCECODE, length: 6
, Coded Values:
[NZMSGR: Derived from a NZMS 260 Grid Reference.]
, [NZTMGR: Derived from a NZTM Grid Reference]
, [GPS: Direct input from a GPS device]
, ...3 more...
)
QARCODE
(
type: esriFieldTypeSmallInteger, alias: QARCODE
, Coded Values:
[1: Differential GPS (advanced) or Geodetic Land Survey.]
, [2: Standard handheld GPS OR accurate location sketch, confirmed by GIS.]
, [3: Site visit OR dillers GPS OR checked location sketch using GIS.]
, ...4 more...
)